Last Updated: November 21, 2026
This policy explains the limited warranty Wanshing Machinery gives on new equipment it sells. It covers defects in materials, manufacturing or assembly when the equipment is used normally and maintained as the manual requires. Coverage belongs to the original buyer. If you were promised different warranty terms in writing when you bought, those terms still apply. Nothing here removes rights you have under Canadian law that cannot be excluded.
New Forklifts (Electric, LPG, Dual-Fuel and Diesel)
| What is covered | Coverage | Includes |
|---|---|---|
| The machine (non-wear parts) | 1 year or 2,000 operating hours, whichever comes first | Approved parts and pre-approved repair labour |
| Major structural and drivetrain parts (listed below) | 2 years or 3,000 operating hours, whichever comes first | Year 1: parts and labour. Year 2: approved parts only |
| Lithium traction battery and charger (electric models) | 1 year | Manufacturing defects only |
| Starter battery (LPG, dual-fuel and diesel models) | 90 days | Manufacturing defects only |
The second-year structural and drivetrain coverage applies to: welded frame and chassis structures; mast structural members and weldments; the drive axle housing, main differential structures and internal gears; and transmission or reduction gearbox housings and internal gears. It does not include engines, drive or lift motors, hydraulic pumps and cylinders, controllers, sensors, wiring harnesses, batteries, chargers or any part not listed.
Electric Pallet Jacks and Stackers
| Model | Machine | Battery | Charger |
|---|---|---|---|
| F4 and F4-201 electric pallet jacks | 1 year | 1 year | 1 year |
| CTD15R electric stacker | 1 year | 1 year | 1 year |
| All other electric pallet jacks (including CBD15W-II, CBD15W-E19, CBD20W-II, WPL202, EPT25-WA and MN-01) | 90 days | 1 year | 1 year |
Battery coverage is for manufacturing defects. Batteries lose some capacity and runtime with age and use; that is not a defect.
Used Equipment
Used forklifts and other used equipment are sold as-is, with no warranty. Our Richmond service team can quote repairs and parts after you buy.
Batteries, Chargers and Parts Bought Separately
Replacement batteries and chargers have a 1-year warranty against material and manufacturing defects. Other parts and accessories, such as tires, wheels, rollers, bearings, keys, cables and connectors, have no warranty unless we agree otherwise in writing.
When Coverage Starts and Ends
- Coverage starts on the date of your original invoice.
- It ends when the time period or the hour limit is reached, whichever comes first.
- A repair or replacement part does not restart the warranty. Replaced parts are covered for whatever time is left on the original warranty.
What Is Not Covered
- Normal wear and consumables: tires, wheels, rollers, bearings, brake linings, seals, filters and fluids.
- Damage from missed or poor maintenance.
- Overloading, collisions, tip-overs, misuse or abuse.
- Damage from continuing to run the machine after a fault code, warning, unusual noise, overheating or safety shutdown.
- Unapproved modifications, wiring changes, repairs or parts, or bypassed safety systems.
- Use or storage outside rated conditions, such as freezers, salt, brine, acids, standing water, heavy dust or extreme temperatures, unless the machine was built for those conditions.
- Battery and charger damage from deep discharge, storing a flat battery, the wrong charger, impact, water or unauthorized changes.
- Damage in transport, or from other outside causes.
How to Make a Claim
- Stop using the equipment if running it could cause more damage or is unsafe.
- Call 604-229-2988 or email info@wanshing.com.
- Send the model, serial number, a short description of the problem, and photos or a video.
- We may also ask for your invoice, the hour meter reading, error codes and maintenance records.
- Where it makes sense, we start with troubleshooting by phone or video. Many problems are fixed this way.
How Covered Repairs Are Done
In our Richmond shop. Inspection and diagnosis are free. For a confirmed covered failure, we pay for approved parts and labour. If the repair is not covered, we quote it first and only proceed with your approval. You arrange transport to the shop, or we can quote pickup.
On site in Greater Vancouver. Our technicians can come to you. Covered parts and pre-approved labour are included, but the call-out, travel and mileage charges are not covered by the warranty and are quoted separately.
Elsewhere in Canada. We start with remote troubleshooting. If a local repair shop is needed, get their quote and send it to us before any work starts. We approve in writing the labour hours, labour rate and parts. Reimbursement is limited to the approved amount, and any extra needs a further written approval. Call-out and travel charges from the local shop are not covered unless we approve them in writing. For parts-only coverage, local labour is not covered.
Shipping and Other Costs
- We pay standard shipping on approved warranty parts, including batteries and chargers within their warranty period.
- You pay for parts and shipping that are not covered.
- Moving, towing or transporting the machine is your cost unless we agree otherwise in writing.
- The warranty does not cover lost production, lost income, rental of a replacement machine or other indirect losses, except where the law does not allow this to be excluded.
How We Decide a Claim
We review each claim on its evidence and may ask to inspect the equipment. Depending on the problem, we will help remotely, ship a replacement part, repair the equipment in Richmond or on site, or approve a local repair.
Questions about warranty, compatible parts or repairs: call 604-229-2988 or email info@wanshing.com.