Maintenance & Safety

Forklift Training and Certification in BC and Alberta

Trained operator driving an orange forklift inside a large warehouse

Whether you buy, rent or borrow a forklift, the people driving it need proper training. In both British Columbia and Alberta, that responsibility sits with the employer. This guide summarises the main points; for your own workplace, always check the current regulation or speak with a safety professional.

British Columbia

WorkSafeBC states that workers must be trained to CSA Standard B335-15, Industrial Lift Truck Operator Training, and pass the test before they can operate a forklift. Training under the standard includes classroom theory (stability, load charts, pre-use inspection, safe operation) and a practical evaluation on the type of truck the worker will actually use.

The OHS Regulation’s mobile equipment rules (Part 16) also apply. Section 16.3 requires equipment to be inspected before its first use on each shift, and section 16.43 covers lift trucks specifically. WorkSafeBC checks training and inspection records during workplace inspections and incident investigations.

Alberta

Alberta’s Occupational Health and Safety Act, Regulation and Code require employers to make sure workers who operate equipment are competent, that the manufacturer’s operating and maintenance instructions are followed and available, and that equipment is kept in safe condition. The Government of Alberta also publishes a forklift health and safety best-practices guideline that covers operator competency, inspections and safe operation.

What good training covers

  • How a forklift stays stable, and why capacity drops as loads go higher.
  • Reading the data plate and load chart.
  • The pre-use inspection and how to report defects.
  • Travelling, turning and working on ramps.
  • Loading trailers, stacking and de-stacking.
  • Pedestrian safety and blind spots.
  • Refuelling propane or charging batteries safely.

Training is truck-specific

A certificate from a counterbalance course does not automatically qualify someone on a reach truck, order picker or rough-terrain machine. Operators should be evaluated on the equipment class they use, and again when they move to a different type.

Refreshers and re-evaluation

CSA B335 calls for operators to be re-evaluated periodically, commonly every three years, and sooner after an incident, a near miss, unsafe driving, or a change in equipment or site.

Records to keep

  • Each operator’s training date, trainer and the equipment covered.
  • The results of written and practical evaluations.
  • Daily pre-use inspection logs.
  • Maintenance and repair records for each truck. Our forklift maintenance schedule shows what to track.

Renting? The same rules apply

A rented forklift on your site is operated under your safety program, so the same training and inspection rules apply. When you book a forklift rental in Greater Vancouver, make sure the operator is trained on that type of truck before it arrives. Buying one of our forklifts for sale? Plan the training before the truck goes into service.

Official sources