A used forklift can be a very good buy or an expensive mistake, and the difference is usually visible in half an hour. Go in person, ask for the truck to be cold when you arrive (a warm engine hides starting problems), and bring a flashlight and a tape measure.
1. Paperwork and plates
- Data plate. It should be present and readable, and the rated capacity and lift height on it should match the mast and any attachment now fitted. A truck without a correct plate should not be put into service.
- Hour meter. Note the hours, and check whether wear on pedals, seat and steering wheel matches them.
- Service history. Invoices or a maintenance log tell you more than the model year.
2. Forks
- Heel wear. The bend at the back of each fork wears thinnest. Industry practice is to take a fork out of service once it has lost about 10% of its original thickness.
- Cracks. Look closely at the heel and the hooks.
- Tip height. Set both forks on a flat floor; the tips should sit at the same height and be straight.
3. Mast and chains
- Raise and lower the mast fully, several times. It should move smoothly without jerks, chatter or drift.
- Check for side-to-side play in the carriage and mast channels.
- Look at the lift chains for rust, stiff links and uneven stretch.
- Tilt forward and back; listen for knocking at the tilt pins.
4. Hydraulics
- Look for oil on the cylinders, hoses, fittings and the floor under the truck.
- Raise a load and leave it; it should not creep down.
- Hoses should be supple, not cracked or swollen.
5. Engine (propane or diesel)
- Start it cold. It should catch quickly and idle steadily.
- Watch for heavy smoke and check for blow-by at the oil filler.
- On propane trucks, check the tank bracket, hose and regulator, and smell for leaks.
- Look at the radiator and coolant: overheating is a common reason older trucks get sold.
6. Battery and charger (electric)
- Ask the battery’s age; a worn battery can cost a large share of the truck’s value to replace.
- On lead-acid batteries, look for corrosion, low electrolyte and cracked cases.
- Make sure the charger is included and matches the battery voltage.
- Drive it under load for a while and watch the state-of-charge gauge.
7. Tires, brakes and steering
- Cushion tires are worn out when they reach the wear line or start chunking. Pneumatic tires should have even wear.
- Service brake and parking brake should both hold on a slope.
- Steering should be smooth with no excessive play.
8. Safety equipment
Horn, lights, backup alarm, seat belt, overhead guard and load backrest should all be present and working. Missing items are a sign of how the truck was treated.
9. The loaded test drive
Drive it with a load close to what you will lift every day. Travel forward and reverse, lift to full height, tilt, side-shift if fitted, and stop hard once. A truck that feels fine empty can struggle loaded.
Buying used from Wanshing
Our used forklifts are sold as-is, without warranty, and are not returnable, which is exactly why we encourage you to come and inspect in person before you buy. You can see them at our Richmond location. If you want the peace of mind of a warranty, compare with our new forklifts.